Solare-datensysteme Solar-Log Manual de usuario Pagina 40

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 311
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 39
40
ALPHA-SOL
ALPHA-SOL
Example - Communication address 3:
On
Off
DIP switch
Example - Communication address 4:
On
Off
DIP switch
Example - Communication address 5:
On
Off
DIP switch
You will find more information at:
http://en.wikipedia.org/wiki/Binary_number.
Installing the RS485 interface
Procedure
Install the RS485 interface in the inverter in accordance with the interface card installation instructions.
Connect inverters to the Solar-Log™
The wiring is done using a
•
ready-made BKL2 data cable (optional extra; not supplied)
or
•
self-made, shielded 4 wire data cable and terminal block connector.
Procedure
1. Open the inverter as shown in the inverter's instructions.
2. Pull the free wires through the wire opening in the inverter.
3. If you are making the cable yourself, connect the wires as shown in the following diagram:
Vista de pagina 39
1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 310 311

Comentarios a estos manuales

Sin comentarios