Solare-datensysteme Solar-Log Manual de usuario Pagina 173

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 311
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 172
173
Powercom
Powercom
Solar-Log™ terminal strip connector Inverter terminal strip
Terminal PIN
1 R+
1 T+
4 R-
4 T-
4. Close the inverter if no other inverters are to be connected.
5. Insert the terminal block connector into the Solar-Log™ RS485 socket.
Connect the inverters to each other
•
Connect using a 4 wire, shielded data cable
•
Where to connect: Terminal strip inside the inverter on the retrofitted RS485 interface card
Procedure
1. Open the inverter as shown in the inverter's instructions.
2. Connect terminals R+, T+, R- and R+ of inverter 1 to the corresponding terminals on inverter 2.
3. Connect the other inverters to each other in the same way.
4. Close inverters.
Vista de pagina 172
1 2 ... 168 169 170 171 172 173 174 175 176 177 178 ... 310 311

Comentarios a estos manuales

Sin comentarios