Solare-datensysteme Solar-Log Manual de usuario Pagina 105

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 173
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 104
105
Operating the Solar-Log 500 and 1000 via the Display
Updating the firmware
The Solar-Log™ firmware can be updated via the USB connection.
Go to our website to download the current firmware version:
http://www.solar-log.com/de/service-support/firmware.html.
1. Select the Solar-Log 1000 and copy the firmware to the USB stick.
2. Plug the USB stick into the Solar-Log 1000.
3. Tap on
USB in the main menu.
4. Tap on Update Firmware.
Fig.: USB Firmware Update
5. Tap on
Search Firmware.
6. The current firmware is located on the USB stick and imported.
Note!
Clear your Internet browser's cache after the update.
7.
Tap on Cancel if you do not want to update.
•
The main navigation screen is displayed.
5�7 Changing settings in the configuration menu
The configuration menu allows you to change settings and to make adjustments to the device's software.
Although the device should be pre-configured by your installer, it may happen that you would like to like
to make adjustments such as changing your password and changing the network settings when, for exam-
ple, you get a new router.
•
Contact your installer for changes to your configuration.
•
If you would like to make the changes yourself, you can download the Installation Manual from our
website.
Vista de pagina 104
1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 172 173

Comentarios a estos manuales

Sin comentarios