Solare-datensysteme Solar-Log Sensor Box Professional Plus Manual de usuario descargar pdf (Pagina 7)

2.5 Starting Up at the Solar-Log™

By switching-on the Solar-Log™, it will provide power to the Sensor Box Professional Plus. Afterwards, the

Sensor Box Professional Plus must be congured to the free RS485-port:

•

Open the dialogue Conguration | Devices | Denition in the WEB menu of the Solar-Log™.

Please refer to the Installation Manual in chapter “Connecting accessories”, “Installation” and “Congu-

ring connected devices”.

•

Select „M&T Sensor“ as interface.

•

Carry out device detection.

The Sensor Box Professional Plus is integrated with the system in the same way as an inverter. The further

conguration could be handled with the Solar-Log™ web interface.

2.6 Technical Data

Sensor Box Professional Plus

Dimensions, weight W/H/D in mm: 145/85/40, 360 g

Housing

Powder-coated aluminum

Protection mode IP65

Operating temperature -20 °C to +70 °C

Power supply Via RS485 data cable from Solar-Log™ (10,5-28 V

Supply Current Typical 10 mA

Communication Port RS485

Protocol

Solar-Log™, 9600 Baud, 8N1

Irradiance Irradiance : ± 5 % (0 W/m

to 1400 W/m

)

Cell-temperature: ± 1K (-20 °C to +70 °C) / ± 2 K (-40 °C to

+85 °C)

Installation with screws on the substructure

Connection cable

•

4 pole, 3 m (10 feet), weather and uv resistant (LiY(St) 11 Y (4

x 0,14)

•

prolongable up to 50 m (165 feet)

Conformity CE :DIN EN-61000-6-1:2007 and DIN EN-61000-6-3:2007

1 2 3 4 5 6 7 8 9 10 11 12 ... 23 24

Sin comentarios

Solare-datensysteme Solar-Log Sensor Box Professional Plus Manual de usuario Pagina 7