Solare-datensysteme RS485 Funkpaket/ Radio Set Manual de usuario descargar pdf (Pagina 12)

Installation Manual - Solar-Log™ RS485 Wireless Package

2�5 Diagnostic Function

There is a special Diagnostic Configuration to test the wireless range

and to determine the ideal mounting location for the modules/antennas. Connect one of the modules with

the Solar-Log™ radio cable to

the desired RS485 output on the Solar-Log™ to use the diagnostic function.

Note!

The RS485 interface that is to be tested

has to be configured in the Solar-Log™'s WEB menu under Configuration | Devices

| Definition. That means the inverter manufacturer also has to be selected to acti-

vate the Wireless Package.

After that, it is automatically ready for operation.

The second module has to be placed in the Diagnostic Configuration mode:

1. Plug in the red diagnostic connector.

2. Set the DIP switches to diagnostics.

1 2 3 4

3. Connect a nine-volt battery to the power adapter that was supplied and then plug that into the

Wireless module. (see illustration)

Fig.: Wireless module with diagnostic connector and “mobile” nine-volt power supply

Now the second Wireless module is operational and is transmitting all of the data

it receives back immediately.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17

Sin comentarios

Solare-datensysteme RS485 Funkpaket/ Radio Set Manual de usuario Pagina 12